Graitec Blog

Welcome to the Graitec blog, we hope you enjoy the content and if so please subscribe to the blog or a category for automatic notifications when new posts are added.

Adam Butcher

A Guide To Autodesk Inventor Positional Representations

A Guide To Autodesk Inventor Positional Representations
Most of the designs we create using Autodesk Inventor are built as fixed non-moving assemblies that never reflect the intended purpose of the finished product. Positional representations can be used t...
Continue reading
4
  3441 Hits
James Wood

Graitec Design & Vis VR project for Mabey

Graitec Design & Vis VR project for Mabey
Here at Graitec we were asked by one of our existing customers Mabey to create a VR presentation. The proposed use for the Virtual Reality experience was to support Mabey's attendance at the IMESA 201...
Continue reading
3
  2656 Hits
Alan Johnson

Revit Tip - How To Add To/From Room To A Door Schedule

Revit Tip - How To Add To/From Room To A Door Schedule
Have you ever created a building layout in Autodesk Revit and needed your door schedule to show either ‘to room’ or ‘from room’? When you start adding the required fields to the schedule you won'...
Continue reading
3
Tags:
  3991 Hits
Chris England

3D Printing with Fusion 360

3D Printing with Fusion 360
3D Printing with Fusion 360 is a user friendly experience, with some simple and effective workflows. If send to a 3D print utility is not selected, Fusion will export straight to a STL file format and...
Continue reading
5
  4322 Hits
Alan Johnson

A Quick Tip For Revit Floor Finishes

A Quick Tip For Revit Floor Finishes
You can apply Revit  floor finishes in a variety of ways. Most methods are based on the thickness of the finish material. For example, a thin finish such as a carpet might be applied with the spl...
Continue reading
5
Tags:
  6081 Hits
James Wood

Graitec Design & Vis Water and Wastewater Treatment System project for Richard Alan Engineering

Graitec Design & Vis Water and Wastewater Treatment System project for Richard Alan Engineering
Recently Graitec Design and Vis was commissioned for an important project - to complete an animation for Richard Alan Engineering. The brief was to show the process and methodology of how water is tre...
Continue reading
2
  2144 Hits
Alan Johnson

An Overview Of The Autodesk Revit Interface For 2018

An Overview Of The Autodesk Revit Interface For 2018
Regular Autodesk Revit users will no doubt remember where particular tools/commands are in tabs, and which window contains what info etc. However, new or inexperienced Revit users often struggle to fi...
Continue reading
1
Tags:
  2804 Hits
Chris England

Autodesk Fusion 360 Configuration add in

Autodesk Fusion 360 Configuration add in
Here is a quick guide for the fantastic Autodesk Fusion 360 Configuration add in, which allows users to save various configurations of a model with either modified suppression states or parametric edi...
Continue reading
11
  4288 Hits
Alan Johnson

A Guide To The Navisworks Interface For 2018

A Guide To The Navisworks Interface For 2018
Regular Navisworks users will no doubt remember which tools/commands are on which tab and which window contains what info etc. But new or inexperienced users of Navisworks often struggle to find or re...
Continue reading
0
  2128 Hits
Chris England

A Guide to Inventor HSM NC Editor

A Guide to Inventor HSM NC Editor
HSM edit is an OEM version NC editor that is based on CIMCO edit which is created by CIMCO. CIMCO has been around since 1991 and has its headquarters in Copenhagen, Denmark. Over the years, CIMCO has ...
Continue reading
3
  3529 Hits
Autodesk reseller uk logo2
 
qms microsoft logo