Autodesk Robot Structural Analysis Training and Technical Support

Graitec offer a range of affordable Robot training courses and technical support to suit all levels of users including training courses for beginners new to the software, through to advanced Robot training courses and individually tailored mentorship consultancy for end users with more experience or who want to focus on a particular design analysis challenge or specific program functionality.

Robot training wind loadingsAs original authors of Robot Structural Analysis software, training is delivered under the guidance of one of Graitec’s Structural engineers who have years of worldwide experience in delivering Robot training, technical support and mentorship to end users and engineers working on simple to very complex design analysis challenges.

Training can be delivered in a variety of forms to suite your requirements which include classroom based training either at one of our training centers or on site at your premises for standard or advanced courses. Alternatively, we can also offer Robot training online by the hour in bite size chunks where you can choose which particular subjects you would like to cover by selecting topics from our standard courses:

Information on available courses and technical support offering can be found below.

Essentials Courses

Advanced Courses

Robot Consultancy

Robot Technical Support

Robot Essentials Training Courses:

Course Title: Robot Essentials Training - Steel Structures 2D

Robot training steel structure 2D screenshot

Course Duration: 2 Days

Course Outline:

                                                            

  • 2D frame geometry
  • Loads and load patterns
  • Results analysis
  • Calculation reports
  • Steel members dimensioning parameters
  • Dimensioning and optimization
  • Dimensioning reports
  • Steel connection analysis (EC3 standard)

 

Course Title: Robot Essentials Training – Reinforced Concrete Structures 2D

Robot training RC structure 2D screenshot

Course Duration: 2 days

Course Outline:

 

  • 2D frame geometry
  • Loads and load patterns
  • Results analysis
  • Calculation reports
  • RC Beams, columns, foundations dimensioning parameters
  • RC member dimensioning
  • RC members dimensioning reports and reinforcement drawings
  • 2d slab geometry
  • Meshing parameters
  • Slab loads and load patterns
  • Result analysis for slab
  • Slab reinforcement calculation
  • Required and provided reinforcement

 

Course Title: Robot Essentials Training – Steel/Concrete 2D

Robot training rc concrete screenshot

Course Duration: 2-3 days

Course Outline:

                                                                             

  • Steel Structures 2D and Reinforced Concrete Structures 2D combined – only available for users already familiar with software

If you are interested in taking a Robots Essentials course, click on the button below to request a training quote or to check available course dates.

Request a Training Quote or Check Course Availability

Robot Advanced Training Courses

Course Title: Robot Advanced Training – Steel Structure 3D

Robot advanced training steel structure 3D screenshot

Course Duration: 2 Days

Course Outline:

 

  • 3d frame/truss steel structure
  • Advanced options in Autodesk Robot Structural Analysis (rigid links, semi rigid releases, bracings, tension members, etc.
  • Advanced model settings – introduction to non-linear analysis
  • Steel members dimensioning parameters (including advanced options)
  • Dimensioning and optimization
  • Dimensioning reports
  • Steel connection analysis (EC3 standard)

 

Course Title: Robot Advanced Training – Concrete Structures 3D

robot advanced training RC structure 3D screenshot

Course Duration: 2-3 Days

Course Outline:

 

  • 3d concrete building geometry definition
  • DXF, DWG files import
  • Revit geometry import
  • Loads and load patterns.
  • Meshing parameters
  • Results analysis
  • Calculation reports
  • RC Beams, columns, foundations dimensioning parameters
  • RC member dimensioning
  • RC members dimensioning reports and reinforcement drawings
  • RC slabs and walls dimensioning parameters
  • Slab and walls reinforcement calculation
  • Required and provided reinforcement
  • Circular tank geometry definition
  • Loads and load patterns (including temperature and hydrostatic loads)
  • Results analysis
  • Tank reinforcement calculation

 

Course Title: Robot Advanced Training – Dynamic and Non-Linear Analysis

structural analysis dynamic and nonlinear screenshot

Course Duration: 2 Days

Course Outline:

 

  • Types of dynamic analysis available in Autodesk Robot Structural Analysis
  • Non-linear analysis load cases parameters
  • Modal analysis (parameters and examples)
  • Harmonic analysis (parameters and examples)
  • Seismic and spectral analysis (parameters and examples)
  • Time history analysis (parameters and examples)
  • Non -linear analysis available in Autodesk Robot Structural Analysis
  • P-Delta and large deformation effect
  • Tension compression objects
  • Non-linear supports
  • Non- linear releases
  • Cable structures
  • Imperfection definition
  • Convergence improvement methods

 

Course Title: Autodesk Robot BIM Workflow - Autodesk Revit Data Transfer

revit robot transfer screenshot

Course Duration: 1-2 Days

Course Outline:

 

  • Building definition in Autodesk Revit
  • Analytical model parameters
  • Analytical model correction tools
  • Loads and load pattern
  • Model transfer to Autodesk Robot Structural Analysis (section and material mapping)
  • Building analysis and design in Autodesk Robot Structural Analysis
  • Data transfer from Autodesk Robot Structural Analysis to Autodesk Revit
  • Graitec Power Pack for Revit – Revit analytical model correction

Click on the button below to request pricing and course availability or to find out more about Robot Advanced training. 

Request a Training Quote or Check Course Availability

 

Robot Consultancy

Course Title: Robot Structural Analysis Mentorship Consultancy

Robot consultancy screenshot

Course Duration: Defined by customer requirements

Course Outline:

 

Our Mentorship consultancy is geared to very customer centric requirements so is extremely flexible giving you the option to guide the outcome of your session(s) or even use your own models as the basis of the consultancy.

This could range from guiding a user who has perfect knowledge of design codes and has completed only basic training but wants to get a better understanding of best practices and projects workflows using Robot Structural Analysis software. Through to mentorship for more advanced users who perhaps have a particular project such as office building or even football stadium and are experiencing some issues for example during meshing, nonlinear analysis etc. that need to be solved for the best outcome/result.

Mentorship Consultancy using client models or projects may require additional analytical work with customer’s models to be sure that all end users requirements can be fulfilled.  

Autodesk Robot Structural Analysis Technical Support

Graitec’s Robot technical support team deliver help and support to users across the globe on a daily basis and we offer two distinct levels of support which are basic and extended.

robot structural analysis technical support screengrabBasic technical support is predominantly geared to IT related issues to help clients deploy their software or deal with licensing and basic configuration issues, whereas Extended technical support is geared to helping cover user issues.

Both of our Robot technical support packages run for a duration of 12 months or 10 hours (whichever comes first) and are available at a very competitive price point. Support is not restricted to a single user, but can be used by any member of your team so you get the maximum benefit for your spend. If you use all 10 hours, then you can simply purchase a further 10 hours as required.

Typical coverage is detailed below:

Basic

  • Software installation
  • Hot fix, Service Pack installation
  • Licensing problems;
  • Network license configuration;
  • Basic software configuration
  • Bugs registration .
  • User Autodesk Account maintenance
  • Graphic card issues

 Extended

  • Structure definition – geometry, supports, releases, meshing
  • Loads and load pattern definition
  • Structure analysis – instability, mesh incoherence, isolated nodes, separate structures etc.
  • Results analysis – calculation reports, results table configuration, results interpretation
  • Dynamic analysis – calculation parameters
  • Non - linear analysis – calculation parameters
  • Dimensioning procedures – workflow, parameters definition, results analysis, reports

For more information on our Robot training courses, pricing and availability, please click on the button below and a member of the team will get back to you to discuss your requirements.

Request a Training Quote or Check Course Availability

Autodesk Inventor HSM Essentials Training

Autodesk hsm 2018 badgeGraitec's professional Inventor HSM training is geared to give users the best possible start when first using Autodesk Inventor HSM. HSM is a powerful CAM software application designed to improve productivity and deliver seamless workflows in manufacturing environments so design teams can easily move components from the design stage through to CNC manufacture.

The courses will help users move from 2D/2.5D milling through to 3D milling with multi-axis simultaneous machining into its milling and mill/turn environment using the same intuitive approach to toolpath programming found in the 2D/3D machining strategies.

Inventor HSM Courses Available

Introduction to Autodesk Inventor HSM 2D / 2.5D milling Duration: 1 Day
Introduction to Autodesk Inventor HSM 2D / 2.5D milling, 3D milling, Multi-axis milling and Turning Duration: 2 Days

Designed for: These courses cover the essentials of Autodesk Inventor HSM.

Prerequisites: It is recommended that you have an understanding of the Autodesk Inventor software and have been on Autodesk Inventor Essentials training.

Inventor HSM Course Objectives

  • Understand the fundamental concepts, workflows and benefits of using Inventor HSM.
  • Locate and navigate the Inventor HSM user interface and browser environments.
  • Understand the 2D / 2.5D, 3D, Multi-axis Milling and Turning commands.
  • Understand the machining simulation and post process generation.

After completing this course the user will be able to quickly and efficiently program their parts using a variety of strategies in Inventor HSM.

Course Outline

2D / 2.5D
Creating a Setup, Facing, Contouring, Adaptive Clearing, Pocket Machining, Counterboring, Countersinking, Drilling, Tapping, Engraving, Chamfering, Stock Simulation and Post Processing.

3D / 3 + 2
Creating a setup, Facing, outside contouring 2D, roughing using adaptive clearing, Adaptive clearing rest machining, Horizontal finishing, Contour finishing, Parallel finishing, Radii machining, Scallop machining, Pencil milling, Simulation and Post processing.

Multi-axis
Swarf milling is a multi-axis strategy for machining with the side of the tool. This strategy supports both machining from contours only and from surfaces. When machining from contours only, you are required to manually synchronize the contours. Swarf supports several different modes that control how to machine down the sides.

Turning
Creating a turning setup, facing, machining a turning profile, machining a profile groove, cutting an external thread and cutting off the part.

The suggested course duration is a guideline.

Course topics and duration may be modified by the instructor based upon the knowledge and skill level of the course participants, and training can be taken either on site or at one of our conveniently located local training centres.

The course is Autodesk Authorised with Courseware, and Certificate of Completion awarded

To book a place on this course, or to enquire about training pricing and course availability, please click on the button below and fill out the form.

Request a Training Quote or Check Course Availability

Autodesk Vault Training Courses

Graitec have a dedicated data management team devoted to Autodesk Vault training, consulting and implementation services. With increasing numbers of businesses working with 3D data, requirements are increasing to effectively manage various aspects of the design process and promote collaborative working practices.

vault training scan reportAutodesk Vault is a premier data management system helping businesses working with digital prototyping workflows manage complex data sets, work in progress and revision management control.

Autodesk Vault Training Options

Our data management team offer three levels of vault training depending on the platform you will be using and your business requirements.

  • Autodesk Vault Basic training - Ideal for users new to data management environments looking to use vaults basic but powerful data management features.
  • Autodesk Vault Workgroup training - Ideal for users looking to take advantage of Vault Workgroups more advanced features including revision control, projects and reporting, data security and project lifecycles and so on.
  • Autodesk Vault Professional training – Ideal for users and companies with extended data management requirements found in the professional version, for example bill of materials management, automated engineering change orders, ERP integration and multi-site workflows etc.

Typical course topics could include:

  • Introduction to Vault
  • Basic Vault tasks
  • Organising and populating a Vault
  • Managing Autodesk Vault data
  • Working with Inventor
  • Working with AutoCAD
  • Using Advance Vault features

Given the nature of data management solutions, Autodesk Vault training courses are generally customised to suit the individual requirements of each business and of course to suit the Vault version and type of software deployed, as well as catering for the target users for example Designers, Engineers, administrative users and so on.

Please contact your local office to arrange for a specialist to discuss your needs or alternatively click on the link below to request more information about Autodesk Vault training, pricing or availability and we will call you.

Request a Training Quote or Check Course Availability

Autodesk Fusion 360 Training

Autodesk Fusion 360 Training and Fusion 360 Courses

Autodesk Fusion 360 training ensures that you make the most of this unique 3D Design, Simulation and CAM programming tool. Fusion connects your entire product design and development process into a single cloud-based platform that works on your Mac and PC.

Fusion 360 screenshotYou can use Autodesk Fusion 360 to model your design in 3D, before using simulation tools to analyse your design for strength or light-weighting. You can then chose how to output your designs. You can use Fusion 360 to create files for 3D printing, programme your CAM machine or create traditional 2D Drawings.

Fusion 360 comes with embedded data management and collaboration tools making it the complete product innovation platform and enrolling on a Fusion 360 CAD course is a great way to start building your 3D design skills in product design and manufacturing.

Given the power of the software it is relatively easy to pick up but you can short cut the route to becoming a Fusion 3D power user with the help of our enthusiastic instructors. Once you are familiar with all elements of the software your business will then be able to benefit from the connected workflow in Autodesk Fusion 360, taking you from concept design through simulation to CAM and 3D printing all from within the same CAD package.

Graitec offer an extensive training portfolio and can deliver training at our countrywide Autodesk training centres, on your own premises or even online with our flexible or certified Autodesk online training platform.

Fusion 360 Training Courses

Fusion 360 has been developed for a number of different industry disciplines. Our Fusion 360 Tutorials have been broken up into an Essentials course to help you with the basics and advanced modules in specific subjects such as CAE and CAM.

Click this link for more information about Autodesk Fusion 360

Fusion 360 model

Autodesk Fusion 360 Essentials Training

Students are introduced to the fundamental principles of 3D direct and parametric modelling on Fusion 360. Students will learn how to import existing 3D models into the platform and collaborate on 3D models online.

Students will learn how to convert their Designs into Assembly models for Kinematic analysis, Parts list creation and
how to manage their designs online, export 2D and 3D files for downstream use, and create 2D drawings from 3D models.

Download Agenda

Autodesk Fusion 360 Advanced Training

Advanced training modules are available on request for the following elements: Fusion 360 CAM, Fusion 360 Simulation and 360 T-Splines

Autodesk Fusion 360 Transition Training

This course is specifically design for users transitioning from PC based CAD software such as Catia, Creo, Pro-E, Solidedge or Solidworks.

Autodesk HSM Training

This course is designed for users wishing to learn HSM CAM to improve design to CNC workflows - Visit our HSM CAM training page for more information.

For more information about Autodesk Fusion 360 training prices and availability, please click on the button below and fill out the form. 

Request a Training Quote or Check Course Availability

Online Autodesk CAD Training Courses Available

Graitec-e-training-logo

Graitec’s Autodesk e-learning solution (powered by the GET training platform) offers access to the widest and a continually growing portfolio of Autodesk e-learning modules available today both for guided (Autodesk Certified Training) and flexible training.

Courses are available in separate libraries so you can enrol in single or multiple libraries depending on your or your company’s particular training requirements.

For learners that may be using previous versions of Autodesk software that may have not been upgraded or learners need to remain on previous versions due to project limitations the Autodesk library spans across selected common previous releases of software dating back to 2012.

     

Autodesk Library

   

AutoCAD 2D Drafting and Annotation

 

Autodesk BIM 360 (Glue and Field)

AutoCAD 3D

 

Autodesk Dynamo

AutoCAD Advanced

 

Autodesk Fusion 360*

AutoCAD Architecture

 

Autodesk Infraworks

AutoCAD Civil 3D

 

Autodesk Infraworks 360

AutoCAD Civil 3D Advanced Concepts

 

Autodesk Inventor

AutoCAD Electrical

 

Autodesk Inventor iLogic

AutoCAD LT

 

Autodesk Inventor Professional*

AutoCAD Map 3D

 

Autodesk Inventor Routed Systems

AutoCAD Mechanical

 

Autodesk Moldflow*

AutoCAD MEP

 

Autodesk Navisworks Manage*

AutoCAD P&ID

 

Autodesk Navisworks Simulate*

AutoCAD Plant 3D

 

Autodesk Navisworks

AutoCAD Raster Design*

 

Autodesk Point Layout*

Autodesk 3ds Max

 

Autodesk ReCap

Autodesk 3ds Max Design

 

Autodesk ReCap Photo

Autodesk Advance Steel

 

Autodesk ReCap Pro

Autodesk Fabrication CADmep

 

Autodesk Revit Advanced Concepts

Autodesk Maya Animation*

 

Autodesk Revit Architecture

Autodesk Maya Modeling*

 

Autodesk Revit Families

Autodesk Nastran*

 

Autodesk Revit MEP Advanced

Autodesk Showcase

 

Autodesk Revit MEP

Autodesk Simulation

 

Autodesk Revit Structure

Autodesk Simulation Mechanical*

 

Autodesk Revit Structure Advanced

Autodesk Vault Basic

 

Autodesk Robot Structural Analysis Professional*

Autodesk Vault Professional

   

Autodesk Vault Workgroup

   
     

BIM Library

 

Design Library

BIM 101

 

Solidworks

BIM 201

 

Bluebeam

BIM for Architects

 

Sketchup

BIM for Contractors

 

Grasshopper*

BIM for Engineers

 

Rhino*

BIM for Owners

 

Primavera P6*

BIM for Structural Engineers

   

BIM in Facilities Management

   

BIM for Project Managers*

   
     

Microsoft Library

 

Adobe Library*

Microsoft Access (2 Levels)

 

Illustrator

Microsoft Excel (3 Levels)

 

Photoshop

Microsoft Outlook (2 Levels)

 

InDesign

Microsoft PowerPoint (2 Levels)

   

Microsoft Project (2 Levels)

   

Microsoft Publisher

   

Microsoft Works (3 Levels)

   
     

Total Leadership Library*

   
     

Foundation for Your Future: Plan Creation.

 

Relationship Skills: The 12 Steps to Great Relationships & High Performing Teams

Primal Safety – How to Fully Utilize the Emotional Side of Safety

Communicate, Motivate, Persuade, Present; How Do People Perceive You?

Innovation and Creativity, Improvisation and Leadership, Emotional Intelligence, and Marketing

Time Management & Systems Thinking

 

Stress Management, Peak Performance & Wellness

Workforce Development: How to Attract and Retain the Best Employees, Diversify and Motivate

Lifelong Learning

   

To find out more about the Graitec e-training solution register for a webinar or simply request a quote and we’ll get back to you to discuss your requirements.

Powered-by-Global-eTraining-small

Autodesk reseller uk logo2
bottom logo

In order to provide you with the best online experience this website uses cookies.